张松-山东大学机械工程学院
张松
发布时间:2018-03-08 21:30:36    作者:    点击:[]
姓名 张松 性别

出生年月 1969.03  行政职务
学历 博士研究生 学位 博士
专业技术职务及任导师情况  教授,博士研究生导师
所在一级学科名称  机械工程
所在二级学科名称  机械制造及其自动化

 

学术身份

山东省“泰山学者”特聘专家

 

学术兼职

中国机械工程学会高级会员,国家自然科学基金通讯评议专家,“Journal of Cleaner Production”、“Journal of Manufacturing Science and Engineering”、“International Journal of Mechanical Sciences”、“International Journal of   Advanced Manufacturing Technology”、“Machining Science and   Technology”、“International Journal of Computer Integrated   Manufacturing”、《计算机集成制造系统》等刊物的同行评审专家,中航工业成飞科技协作咨询专家、潍柴动力股份有限公司技术专家、海信集团技术专家等。

 

国内外学习和工作经历

➢1987.09-1991.07:山东工业大学机械制造工艺及设备专业学习,获工学学士学位;

➢1991.09-1994.06:山东工业大学机械制造专业学习,获工学硕士学位;

➢2001.09-2004.06:山东大学机械制造及其自动化专业学习,获工学博士学位。

工作经历:

➢1994.07-2001.08:济南二机床集团有限公司(济南第二机床厂)助理工程师、工程师;

➢2004.07-至今:山东大学机械工程学院讲师、副教授、教授;其中,2007.08-2008.08:美国The University of Alabama访问研究。

 

主讲课程

➢ 机械制造技术基础、现在制造装备设计、几何量公差与检测。


研究领域
➢ 高效切削机理及表面完整性、机床动态特性分析与优化、数控编程及加工仿真、发动机再制造、口腔生物力学。


承担科研项目情况

➢ 山东省“泰山学者”工程专项:复杂曲面零件高质高效加工,在研;

➢ 国家自然科学基金:基于多物理场耦合的模具钢硬态切削表面层微观组织演变,在研;

➢“高档数控机床与基础制造装备”科技重大专项:大功率汽车柴油发动机关键零件加工线成套刀具的应用验证与示范(子课题),在研;

➢ 山东省重点研发计划项目:齿槽骨低损伤钻削机理研究与可重构钻削导板设计及3D打印系统开发,在研;

➢ 山东省自主创新及成果转化专项:立式数控铣车复合加工机床(子课题),在研;

➢ 青岛海信模具有限公司:模具高效加工关键技术,在研;

➢ 西部经济隆起带和省扶贫开发重点区域急需紧缺人才项目:高精密附件铣头研制,结题;

➢ “高档数控机床与基础制造装备”科技重大专项:高速龙门五轴联动加工中心(子课题)结题;

➢ 国家自然科学基金:基于使役性能驱动的硬态铣削高完整性表面的定量创成研究,结题;

➢ 教育部高等学校博士点基金:基于计算流体动力学的低温油—气冷却润滑机理研究及刀具结构协同优化,结题;

➢ 山东省自主创新专项:高精度重心驱动桥式五轴镗铣加工中心关键技术研发及产业化(子课题),结题;

➢ 教育部留学回国人员科研启动基金:淬硬模具钢高速铣削表面残余应力形成机理及优化控制,结题;

➢ “高档数控机床与基础制造装备”科技重大专项:立式铣车复合加工中心(子课题),结题;

➢ 教育部高等学校博士点基金:低温油-气切削介质的超声振动强化润滑机理研究,结题;

➢ 山东省优秀中青年科学家奖励基金:钛合金切削过程中的高效冷却介质及冷却机理研究,结题;

➢ 山东省自然科学基金:模具钢硬态铣削条件下的白层形成机理及优化控制,结题。


近期主要的代表性论文、著作、专利

➢ Airong Zhang, Song Zhang*, Cuirong Bian. Mechanical properties of bovine cortical bone based on automated ball indentation technique and graphic processing method. Journal of the Mechanical Behavior of Biomedical Materials, 2018, Vol.78: 321-328.

➢ Xiaona Luan, Song Zhang*, Gang Li. Modified power prediction model based on infinitesimal cutting force during face milling process. International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, Vol.5(1): 71-80.

➢ 赵斌, 张松*, 李剑峰, 田昆. 基于零件摩擦学性能的磨削参数优化. 浙江大学学报(工学版), 2018, Vol. 52 (1): 16-23.

➢ Bin Zhao, Song Zhang, Xiqun Lu, Qingbing Dong. Cyclic tangential loading of a power-law hardening elastic-plastic spherical contact in pre-sliding stage. International Journal of Mechanical Sciences, 2017, Vols. 128-129: 652-658.

➢ Bin Zhao, Song Zhang*, Jianfeng Li, Peng Wang. Friction characteristics of sliding guideway material considering surface functional parameters under hydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2017, Vol. 231(7): 813-825

➢ Bin Zhao, Song Zhang*, Leon M. Keer. Spherical elastic-plastic contact model for power-law hardening materials under combined normal and tangential loads. ASME Trans.,Journal of Tribology, 2017, Vol.139(2): 021401 (1-8).

➢ P. Wang, S. Zhang*, Z. G. Yan. Study on surface defects in five-axis ball-end milling of tool steel. International Journal of Advanced Manufacturing Technology, 2017, Vol. 89(1-4): 599-609.

➢ Jia Man, Song Zhang*, Xiaona Luan, Yuan Hai, Gaoli Cai. Residual stresses of α-Al2O3/Ni nano-composite coating prepared by automatic brush plating technique. International Journal of Precision Engineering and Manufacturing-Green Technology, 2017, Vol.4 (1): 19-25.

➢ Bin Zhao, Song Zhang*, Leon M. Keer. Semi-analytical and numerical analysis of sliding asperity interaction for power-law hardening materials. Wear, 2016, Vol.364-365: 184-192.

➢ Chengliang Zhang, Song Zhang*, Xufan Yan, Qing Zhang. Effects of internal cooling channel structures on cutting forces and tool life in side milling of H13 steel under cryogenic minimum quantity lubrication condition. International Journal of Advanced Manufacturing Technology, 2016, Vol.83 (5-8): 975-984.

➢ Bin Zhao, Song Zhang*, Zheng Qiu. Analytical asperity interaction model and numerical model of multi-asperity contact for power hardening materials. Tribology International, 2015, Vol.92: 57-66.

➢ Bin Zhao, Song Zhang*, Peng Wang, Yuan Hai. Loading-unloading normal stiffness model for power-law hardening surfaces considering actual surface topography. Tribology International, 2015, Vol.90: 332-342.

➢ Bin Zhao, Song Zhang*, Jia Man, Qing Zhang, Yan Chen. A modified normal contact stiffness model considering effect of surface topography. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2015, Vol.229(6): 677-688.

➢ B. Zhao, S. Zhang*, Q.F. Wang, Q. Zhang, P. Wang. Loading and unloading of a power-law hardening spherical contact under stick contact condition. International Journal of Mechanical Sciences, 2015, Vols.94-95: 20-26.

➢ G.Q. Wang, S. Zhang*, C.R. Bian, H. Kong. Effect of thickness ratio on load-bearing capacity of bilayered dental ceramics. Journal of Prosthodontics, 2015, Vol.24(1): 17-24.

➢ Xufan Yan, Song Zhang*, Chenliang Zhang, Gaoli Cai. Electrochemical characteristics of white layer generated by hard milling AISI H13 steel. International Journal of Advanced Manufacturing Technology, 2014, Vol.75(9): 1799-1807.

➢ Gaoqi Wang, Song Zhang*, Cuirong Bian, Hui Kong. Fracture mechanics analyses of ceramic/veneer interface under mixed-mode loading. Journal of the Mechanical Behavior of Biomedical Material, 2014, Vol.39: 119-128.

➢ Gaoqi Wang, Song Zhang*, Cuirong Bian, Hui Kong. Interface toughness of a zirconia-veneer system and the effect of a liner application. Journal of Prosthetic Dentistry, 2014, Vol.112(3): 576-583.

➢ Gaoqi Wang, Song Zhang*, Cuirong Bian, Hui Kong. Effect of zirconia surface treatment on zirconia/veneer interfacial toughness evaluated by fracture mechanics method. Journal of Dentistry. 2014, Vol.42: 808-815.

➢ Jia Man, Song Zhang*, Jianfeng Li, Bin Zhao, Yan Chen. Effects of electrolyte pH on morphologies and mechanical properties of α-Al2O3/Ni composite coatings and role of zeta potentials in co-deposition process. Surface & Coatings Technology, 2014, Vol.249: 118-124.

➢ Song Zhang, Jianfeng Li, Xiaoli Zhu, Honggang Lv. Saw-tooth chip formation and its effect on cutting force fluctuation in turning of Inconel 718. International Journal of Precision Engineering and Manufacturing, 2013, Vol.14(6): 957-963.

➢ S. Zhang, T.C. Ding, J.F. Li. Determination of surface and in-depth residual stress distributions induced by hard milling of H13 steel. Production Engineering-Research & Development, 2012, Vol.6: 375-383.

➢ S. Zhang, W. Li, Y.B. Guo. Process design space for optimal surface integrity in finish hard milling of tool steel. Production Engineering-Research & Development, 2012, Vol.6: 355-365.

➢ S. Zhang, J.F. Li, Y.W. Wang. Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. Journal of Cleaner Production, 2012, Vol.32: 81-87.【ESI高被引论文】

➢ S. Zhang, T.C. Ding, J.F. Li. Microstructural alteration and microhardness at near-surface of AISI H13 steel by hard milling. Machining Science and Technology, 2012, Vol.16(3): 473-486.

➢ T.C.Ding, S. Zhang*, H.G. Lv, X.L. Xu.A comparative investigation on surface roughness and residual stress during end-milling AISI H13 steel with different geometrical inserts. Materials and Manufacturing Processes,2011, Vol.26(8):1085-1093.

➢ T.C. Ding, S. Zhang*, Y.W. Wang, X.L. Zhu. Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel. International Journal of Advanced Manufacturing Technology, 2010, Vol.51(1-4): 45-55.

➢ S. Zhang, J.F. Li, J. Sun, F. Jiang. Tool wear criterion, tool life, and surface roughness during high-speed end-milling Ti-6Al-4V alloy. Journal of Zhejiang University-Science A, 2010, Vol.11(8): 587-595.

➢ S. Zhang, J.F. Li, J. Sun, F. Jiang. Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy. International Journal of Advanced Manufacturing Technology, 2010, Vol.46(1-4): 69-78.

➢ S. Zhang, Y.B. Guo. Taguchi method based process space for optimal surface topography by finish hard milling. ASME Trans., Journal of Manufacturing Science and Engineering, 2009, Vol.131(5): 051003 (1-9).

➢ S. Zhang, J.F. Li, J.X. Deng, Y.S. Li. Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools. International Journal of Advanced Manufacturing Technology, 2009, Vol.44(1-2): 17-25.

➢ S. Zhang, Y.B. Guo. An experimental and analytical analysis on chip morphology, cutting temperature, oxidation and their relationships in finish hard milling. International Journal of Machine Tools & Manufacture, 2009, Vol.49(11): 805-813.


专利

➢ 发明专利:一种结合面法向动态特性参数测试装置及方法(ZL201310045716.9),授权公告日: 2015.05.13.

➢ 发明专利:刷镀机镀液分离回收系统及控制方法(ZL201310398621.5),授权公告日: 2016.03.23.

➢ 发明专利:用于双材料界面混合模态断裂韧性测试的试件及测试方法(ZL201310673475.2),授权公告日: 2017.06.09.


获奖项目

➢ 钛合金高效加工关键技术研究,山东省科学技术进步二等奖 (第三位,山东省人民政府,JB2011-2-54-3).


联系方式

单位:山东大学机械工程学院

地址:济南市经十路17923号         邮编:250061

电话:0531-88392746               E-mail:zhangsong@sdu.edu.cnzhangsong.sdu@gmail.com

 

上一条:王国法(双聘) 下一条:陈颂英

关闭

Copyright ©2017-2020 山东大学机械工程学院 All rights reserved.
办公地址:山东省济南市经十路17923号山东大学千佛山校区 邮编:250061 电话:0531-88392239 传真:0531-88392239 [网站管理]