万 熠
发布时间:2011-10-27 09:35:35    作者:    点击:[]
姓名 万熠
性别

                                               

4DB77

出生年月 1977.04
行政职务 院长
学历 博士研究生 学位 博士
专业技术职务及任导师情况  教授,博士研究生导师
所在一级学科名称  机械工程
所在二级学科名称  机械制造及其自动化

 

学术身份

教育部新世纪优秀人才、山东大学杰出中青年学者

 

学术兼职

国家自然基金委项目函评专家;
“International Journal of Advanced Manufacturing Technology”、“Materials Science & Engineering C”、“Mechanical Systems and Signal Processing”、《华南理工大学学报自然版》、《南航学报》等国内外期刊审稿专家;
中国机械工程学会《中国机械工程发展路线图》编写组委员;

 

国内外学习和工作经历

1995.09-1999.06 青岛大学机电工程学院 学士
2000.09-2003.08 山东大学机械工程学院 硕士研究生
2003.09-2006.06 山东大学机械工程学院 博士研究生
2006.07-2008.09 山东大学机械工程学院 讲师
2008.10-2012.08 山东大学机械工程学院 副教授/硕士生导师
2012.08-2013.08 英国Brunel University访问学者
2012.12-2015.08 山东大学机械工程学院副教授、副院长
2016.09-2018.04 山东大学机械工程学院教授/博士生导师、副院长
2018.04-2021.04 山东大学研究生院副院长,山东大学机械工程学院教授/博士生导师

2021.04-2022.01 山东大学机械工程学院教授/博士生导师、常务副院长,山东大学研究生院副院长

2022.01 - 至今  山东大学机械工程学院教授/博士生导师、院长

 

主讲课程

设计制造基础、先进制造技术、专业英语


研究领域
智能制造、特种机器人、先进加工理论与技术、增材制造及生物医学工程等


承担科研项目情况

1.   国家自然科学基金项目“钛植入体微纳结构表面设计制造及成骨抗菌性研究”,项目负责人,在研;
2.   国家自然科学基金项目“植入体微纳双级结构表面设计制造及其结合能力研究”,项目负责人,已完成;
3.   国家自然科学基金项目“医用钛合金切削氧化膜形成机理及其耐腐蚀性研究”,项目负责人,已完成;
4.   山东省重点研发计划项目“面向开阔环境巡检的智能安防机器人关键技术研究及应用示范”,项目负责人,在研;
5.   山东省重大创新工程项目“双臂核电站应急处置机器人开发”,项目负责人,在研;
6.   山东省重大基础研究项目“基于材料流变特性的骨支架增材制造关键技术及工艺研究”,项目负责人,在研;
7.   教育部科技发展中心项目,“排爆机器人开发及关键技术研究”,在研;
8.   深圳市科技计划项目“液压救援机器人轻量化设计及双臂协调控制研究”,项目负责人,在研;
9.   山东大学基本科研业务费交叉项目“基于手眼协调的遥操作排爆机器人研究”,项目负责人,在研;
10.   企业课题“室外智能清洁机器人技术开发”,项目负责人,在研;
11.   企业课题“排爆机器人技术开发”,项目负责人,已完成;
12.   企业课题“智能消防机器人开发”,项目负责人,已完成;
13.   企业课题,“消防机器人WIFI通讯系统开发研究”,项目负责人,已完成;  
14.   企业课题“多功能应急救援装备开发”,项目负责人,已完成;
15.   企业课题“研究面向中国制造2025安全的工业网络标准及关键技术—工业网络研究”,项目负责人,已完成;
16.   企业课题“基于约束阻尼减振法的高效切削镗铣刀杆研究”,项目负责人,已完成;
17.   企业课题“通过振动时效去除应力的机理研究”,项目负责人,已完成;
18.   企业课题,“基于交流变频技术的振动时效系统开发”,项目负责人,已完成;
19.   企业课题“铁磁性材料磁性参数测量系统开发”,项目负责人,已完成;
20.   企业课题“汽轮机转子中心孔涡流超声检测专用扫查器开发”,项目负责人,在研;
21.   企业课题“低震动低噪音直列电动空压机开发”项目负责人,已完成;
22.   企业课题“高精度激光通信两轴转台设计与实现”,项目负责人,在研;
23.   企业课题“某机1-3级叶片的高效加工研究” 项目负责人,已完成;
24.   企业课题“基于材料流变特性的骨支架增材制造技术开发”,项目负责人,在研;
25.   企业课题“HB工序密封圈孔加工的断屑改善”,项目负责人,在研;
26.   山东省自然科学基金项目“高速切削加工表面三维特征对航空构件耐腐蚀性影响研究”,项目负责人,已完成;
27.   山东大学创新基金项目“高速切削工艺对航空构件海洋气候下耐腐蚀性影响的关键技术研究”,项目负责人,已完成;
28.   山东大学基本科研业务费交叉项目“植入体表面多尺度功能化设计、制造及生物相容性研究”,项目负责人,已完成;
29.   工信部重大专项“高速高效加工工艺及装备技术创新平台” 项目骨干,已完成;
30.   科技部973计划“多场耦合强作用下超高速加工的切削学行为” 项目骨干,已完成;
31.   国家自然科学基金项目“基于热力学熵的镍基合金高速切削加工刀具磨损机理研究” 项目负责人,已完成;
32.   中国博士后基金一等资助“基于切削稳定性与刀具磨损的某新机叶片高性能切削技术研究”项目负责人 已完成;
33.   教育部博士点基金“基于热力学熵的镍基合金高速切削加工刀具寿命研究”,项目负责人,已完成;
34.   天津市高速切削与精密加工重点实验室开放基金“基于热力学的切削铸造高温合金K24时的刀具磨损研究”,项目负责人,已完成;


代表性论文

1. Xia Y, Wan Y, et al .Development of a toolholder with high dynamic stiffness for mitigating chatter and improving efficiency in face milling[J]. Mechanical Systems and Signal Processing, 2020,145.
2. Wang H, Wan Y, Li Q, et al. Porous fusion cage design via integrated global-local topology optimization and biomechanical analysis of performance[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 112: 103982.
3. Zhang X, Wan Y, Ren B, et al. Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination[J]. Micromachines, 2020, 11(3): 316.
4. Wang G, Wan Y, Ren B, et al. Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation[J]. Materials Science and Engineering: C, 2019, 95: 114-121.
5. Wang G, Wan Y, Liu Z. Construction of Complex Structures Containing Micro-Pits and Nano-Pits on the Surface of Titanium for Cytocompatibility Improvement [J]. Materials, 2019, 12(17): 2820.
6. Ren B, Wan Y, Wang G, et al. Morphologically modified surface with hierarchical micro-/nano-structures for enhanced bioactivity of titanium implants[J]. Journal of materials science, 2018, 53(18): 12679-12691.
7. Wang G, Wan Y, Liu Z. Incorporation of antibacterial ions on the micro/nanostructured surface and its effects on the corrosion behavior of titanium. Materials Letters, 2018.
8. Wang G, Wan Y, Ren B, et al. Fabrication of an orderly micro/nanostructure on titanium surface and its effect on cell proliferation. Materials Letters, 2018, 212: 247-250.
9. Liang X, Wan Y, Zhang C, et al. Robust position control of hydraulic manipulators using time delay estimation and nonsingular fast terminal sliding mode. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2018, 232(1): 50-61.
10.   Liang X, Wan Y, Zhang C. Task Space Trajectory Tracking Control of Robot Manipulators with Uncertain Kinematics and Dynamics[J]. Mathematical Problems in Engineering, 2017, 2017.
11. Wan Y, Wang T, Wang Z, et al. Construction and characterization of micro/nano-topography on titanium alloy formed by micro-milling and anodic oxidation. The International Journal of Advanced Manufacturing Technology, 2017: 1-7.
12. Jin Y, Wan Y, Zhang B, et al. Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties. Journal of Materials Processing Technology, 2017, 240: 233-239.
13. Zhang R, Wan Y, Ai X, et al. Corrosion resistance and biological activity of TiO2 implant coatings produced in oxygen-rich environments. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2017, 231(1): 20-27.
14. Wang T, Wan Y, Liu Z. Synergistic effects of bioactive ions and micro/nano-topography on the attachment, proliferation and differentiation of murine osteoblasts (MC3T3). Journal of Materials Science: Materials in Medicine, 2016, 27(8): 133.
15. Wang T, Wan Y, Liu Z. Effects of Superimposed Micro/Nano‐Structured Titanium Alloy Surface on Cellular Behaviors In Vitro. Advanced Engineering Materials, 2016, 18(7): 1259-1266.
16. Zhaojun Kou, Yi Wan, Zhanqiang Liu, Yukui Cai, Xichang Liang. Deformation control in micro-milling of thin-walled structures. The International Journal of Advanced Manufacturing Technology. 2015, 11, Vol(81),issue 5, pp 967-974. SCI
17. Y Wan, K Cheng, X L Fu and Z Q Liu. An experiment-based investigation on surface corrosion resistance behaviors of aluminum alloy7050-T7451 after end milling. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. Volume 227, Issue 11, November 2013, Pages 1297-1305.
18. Yi Wan, Kai Cheng and Shufeng Sun. An innovative method for surface defects prevention in micro milling and its implementation perspectives.Proceedings of theInstitution of Mechanical Engineers, Part J: Journal of Engineering Tribology. December 2013vol. 227 no. 12 1347-1355.
19. Yi Wan, Kai Cheng, Zhanqiang Liu and Hongtao Ye. An investigation on machinability assessment of difficult-to-cut materials based on radar charts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. December 2013 vol. 227 no. 12 1916-1920.
 
代表著作

1. 刘战强,武文革,万熠.高速切削数据库与数控编程技术.国防工业出版社.2009.01. ISBN 978-7-118-06046-1

发明专利:

1.   一种具有激振功能的刚柔混合型机械手、机器人及方法  
2.   一种柔性材料用冲断机及冲段上料设备.
3.   一种变口径的3D打印暨挤出头及其打印方法
4.   一种用于火焰切割板件的双面打磨装置.
5.   确定填充物在挖掘机大臂中填充位置的方法及大臂结构..
6.   防止三维打印大型复杂钛合金零件变形和开裂的制备方法.
7.   用于难加工材料车削表面观测的夹具及车削实验方法.
8.   风力驱动的PM2.5空气净化系统和净化方法.
9.   数字图像相关法测量高速正交切削过程应变装置及方法.
10.   一种利用表面微沟槽减阻降噪的高速面铣刀.
11.   一种多尺度表面结构植入体及其制备方法.
12.   利用低熔点合金来控制微细加工中毛刺产生的方法
13.   一种加速薄壁工件磨削加工传热的热管吸盘及方法
14.    一种切削加工形成生物钛合金氧化膜的方法


获奖项目

1.难加工材料切削参数优化及切削数据库建立,*技术进步二等奖,
2.基于激光微纳加工的MEMS零部件低成本批量制造关键技术及其应用,浙江省科学技术一等奖;
3.超细晶粒整体硬质合金纳米涂层系列精密铣刀,湖南省科技进步一等奖。


联系方式

单位:山东大学机械工程学院

地址:济南市经十路17923号         邮编:250061

电话:0531-88392058               E-mail:wanyi@sdu.edu.cn

 

上一条:滕玉军 下一条:刘玥

关闭

Copyright ©2017-2020 山东大学机械工程学院 All rights reserved.
办公地址:山东省济南市经十路17923号山东大学千佛山校区 邮编:250061 电话:0531-88392608 传真:0531-88392608 [网站管理]